Quote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.
Quote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?
Quote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.
Quote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to use
Quote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.
Wow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!
Quote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!
Quote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.
Quote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anyth ing, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissors
Quote from: planx on March 07, 2013, 06:18:51 AMQuote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissorsAll I edited was a few words in the list of tools needed, to clarify that the double-sided tape needs to be the thin variety.By the way, what I mean about that variety is shown in pics 20~21.
Quote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissors
Quote from: jerg on March 07, 2013, 06:20:24 AMQuote from: planx on March 07, 2013, 06:18:51 AMQuote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, they are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissorsAll I edited was a few words in the list of tools needed, to clarify that the double-sided tape needs to be the thin variety.By the way, what I mean about that variety is shown in pics 20~21.Ah I see. My 3M tape is rubbery and much thicker than yours. Also, it's grey, not transparent.
Quote from: planx on March 07, 2013, 06:25:35 AMQuote from: jerg on March 07, 2013, 06:20:24 AMQuote from: planx on March 07, 2013, 06:18:51 AMQuote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissorsAll I edited was a few words in the list of tools needed, to clarify that the double-sided tape needs to be the thin variety.By the way, what I mean about that variety is shown in pics 20~21.Ah I see. My 3M tape is rubbery and much thicker than yours. Also, it's grey, not transparent.Are you two going for world record for most quotes stacked within each other?I want in.
Quote from: jerg on March 07, 2013, 06:20:24 AMQuote from: planx on March 07, 2013, 06:18:51 AMQuote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissorsAll I edited was a few words in the list of tools needed, to clarify that the double-sided tape needs to be the thin variety.By the way, what I mean about that variety is shown in pics 20~21.Ah I see. My 3M tape is rubbery and much thicker than yours. Also, it's grey, not transparent.
Quote from: planx on March 07, 2013, 06:18:51 AMQuote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissorsAll I edited was a few words in the list of tools needed, to clarify that the double-sided tape needs to be the thin variety.By the way, what I mean about that variety is shown in pics 20~21.
Quote from: jerg on March 07, 2013, 06:15:10 AMQuote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.Before you do anything, let me try to finish up and confirm my claim. Still trying to hack away with crummy scissors
Quote from: planx on March 07, 2013, 06:10:31 AMQuote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!Huh, I have to edit the guide then. I thought they would be thin, like packing tape thin.
Quote from: jerg on March 07, 2013, 06:04:36 AMQuote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.Moderately thick* I would say. I would say that 3-4 layers of electrical tape equals to one layer of the stick tapeEDIT*: thick not thin. currently cutting away!
Quote from: planx on March 07, 2013, 05:54:27 AMQuote from: jerg on March 07, 2013, 05:51:38 AMQuote from: planx on March 07, 2013, 05:50:23 AMQuote from: jerg on March 07, 2013, 05:46:35 AMQuote from: planx on March 07, 2013, 05:42:45 AMWow, thanks for sharing this. Also thanks for making them Jerg. I just need to find myself some time to make myself some Jergpads with my spare pleather pads. Hmmm, any new innovations to raise the Jergpads 2K~ area to the Velour levels? But with that said, I need to make myself some Jergpads tonight!The pads purrin measured are version 1 of the mod. The version 2 actually has 2 additional components to the procedure, 1 to really improve the sub-bass extension, the other to completely remove the "cupped" feeling of the pleather material - that could be what you are looking for.I think I might try up to version 2. For the stacks of tape, would it be better to use a 3M double sided sticky tape thing and cover it with one layer of electrical tape? I have some lying around that I need to useEr the tape stacks you just stack layers of tape, there is no need of double-sided tape at all. The only parts where double-sided tape comes in are III and IV.I want to use it because one layer of the sticky tape can act as 4 electrical tapes stacked (estimating)?Wait are the 3M tapes thick? The dollar store double-sided tape I used in the mod are incredibly thin, the y are basically just films with adhesive on both sides.
