Topic: Geek Out V2 (Read 5683 times)

CEE TEE · « **Reply #30 on:** July 27, 2015, 04:46:54 PM »

Just ordered a couple of single-ended to balanced adapters from Mimic Cables so I can use all of my 3.5mm and 1/4" (6.25mm) plugs with the V2+ Balanced output. Link

tiohn · « **Reply #31 on:** July 27, 2015, 04:48:14 PM »

Quote from: jexby on July 26, 2015, 09:33:31 PM

Looks like LH Labs 3D cases are back in production,

According to LH Labs, as of Friday, the GOV2 chassis hadn't been finalized, but I imagine it's a different situation with the V2+.

kothganesh · « **Reply #32 on:** August 20, 2015, 07:07:05 AM »

Quote from: CEE TEE on July 27, 2015, 04:46:54 PM

Just ordered a couple of single-ended to balanced adapters from Mimic Cables so I can use all of my 3.5mm and 1/4" (6.25mm) plugs with the V2+ Balanced output. Link

CT, for the V2 this would be a TRRS male to xlr female right ? What I mean is that would this adapter have a TRRS (3.5 mm) male that would go into the V2 and at the other end it would have a XLR female to plug the HP cables into ? Thanks

uncola · « **Reply #33 on:** August 20, 2015, 09:40:52 AM »

kothganesh yes, that's what you'd want to use a 4pin xlr headphone cable with the geek out v2 balanced output.. but he said he's going to use his single ended headphones with teh balanced output, I think he just wants the extra power from the port not the balanced benefits.. he said he's getting a 6.3mm and 3.5mm adapter.

I have a usb cable I got from mimic and the sleeve came loose.. and my friend also got a usb cable from mimic that had issues.. so I Might try a chinese seller adapter instead.. I had these two bookmarked. But as you know, I eventually decided to just get a 3.5mm trrs male to hifiman connector headphone cable instead. the kothganesh approved 8 conductor copper cable

that one is getting delivered on august 28. hopefully my gov2 is here by then

http://www.amazon.com/dp/B00X2Q2SXG/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1DVGMGCAR72T0&coliid=I2GQJFRNMJ0TA4
http://www.ebay.com/itm/251992929864?_trksid=p2055119.m1438.l2649&var=550857724497&ssPageName=STRK%3AMEBIDX%3AIT

khaos · « **Reply #34 on:** August 20, 2015, 01:02:05 PM »

Is there any issue with plugging a pair of LCD-2 (rev 2 without Fazor) into the single ended output on the low gain setting?

The volume is enough for me, it'd sitting on -14 dB for casual listening, -7/5 dB when I want more impact or for tracks that were mastered more quietly. I don't think I've heard any distortion or lack of power.

I just don;t like electronics running hot.

MuZo2 · « **Reply #35 on:** August 20, 2015, 01:09:17 PM »

hope massdrop will have it soon.

kothganesh · « **Reply #36 on:** August 20, 2015, 02:48:21 PM »

Uncola, great minds think alike. I ordered the same adapter cable from Amazon today. Almost bought from MIC but did not pull the plug. Thanks man.

drfindley · « **Reply #37 on:** August 20, 2015, 05:26:56 PM »

Ah! Thanks for the link. I find searching for these kind of things difficult as amazon/google tend to provide microphone only results.

CEE TEE · « **Reply #38 on:** August 20, 2015, 06:24:53 PM »

Oh, I grabbed one of those from Amazon too. Mimic has not shipped or updated me on my adapter order yet. Now I will have 3 types.

AustinValentine · « **Reply #39 on:** August 20, 2015, 06:49:23 PM »

If anyone has a good lead on an RSA/ALO/Kobiconn Male to 3.5mm TRRS, I'd appreciate a pass-along. Likely going to be pairing my GO V2+ with a ALO RX MKIII and that interconnect would be needed to connect V2+ balanced out to MKIII balanced in.

Author Topic: Geek Out V2 (Read 5683 times)

CEE TEE

Re: Geek Out V2

tiohn

Re: Geek Out V2

kothganesh

Re: Geek Out V2

uncola

Re: Geek Out V2

khaos

Re: Geek Out V2

MuZo2

Re: Geek Out V2

kothganesh

Re: Geek Out V2

drfindley

Re: Geek Out V2

CEE TEE

Re: Geek Out V2

AustinValentine

Re: Geek Out V2

(adsbygoogle = window.adsbygoogle || []).push({});

Author Topic: Geek Out V2 (Read 5683 times)